BFRL Publications - lasers

lasers

• Experiences With Point Cloud Registration.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 349-355 pp, 2002.
  Witzgall, C.; Cheok, G. S.
• Experimental Study on Effects of Sample Orientation on Non-Piloted Ignition of Thin PMMA Sheets.
  Poster Session V and Reception;Combustion Institute/Western States, Central States and Eastern States. Fourth (4th) Joint Meeting of the U.S. Sections. Hosted by The Eastern States Section of the Combustion Institute and Drexel University. Poster Session V and Reception. March 20-23, 2005, Philadelphia, PA, 1-6 pp, 2005.
  Gotoda, H.; Manzello, S. L.; Kashiwagi, T.
• Extractive Methods.
  NISTIR 6527; 270 p. June 2000.Measurement Needs for Fire Safety: Proceedings of an International Workshop. National Institute of Standards and Technology. April 4-6, 2000, Gaithersburg, MD, Ohlemiller, T. J.; Johnsson, E. L.; Gann, R. G., Editor(s)(s), 208-229 pp, 2000.
  Blomqvist, P.
• Field Demonstration of Laser Scanning for Excavation Measurement.
  Automation and Robotics in Construction, 17th International Symposium. Proceedings. 2000, 683-688 pp, 2000.
  Cheok, G. S.; Lipman, R. R.; Witzgall, C.; Bernal, J.; Stone, W. C.
• Fire Signatures Provided by Laser Technology Spot Smoke Detectors.
  NISTIR 5904; October 1996.National Institute of Standards and Technology. Annual Conference on Fire Research: Book of Abstracts. October 28-31, 1996, Gaithersburg, MD, 113-114 pp, 1996.
  Anderson, D. D.
• Human-Assisted Object Fitting to Sparse Range Point Clouds for Rapid Workspace Modeling in Construction Automation.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 357-363 pp, 2002.
  Kwon, S. W.; Liapi, K. A.; Haas, C. T.; Sreenivasan, S. V.; McLaughlin, J. T.
• In-Situ Gas Concentration Measurements for Fires.
  NISTIR 6527; 270 p. June 2000.Measurement Needs for Fire Safety: Proceedings of an International Workshop. National Institute of Standards and Technology. April 4-6, 2000, Gaithersburg, MD, Ohlemiller, T. J.; Johnsson, E. L.; Gann, R. G., Editor(s)(s), 234-243 pp, 2000.
  Blevins, L. G.
• Instrumentation for Bench- and Large-Scale Test Fixtures.
  HOTWC 2006;Halon Options Technical Working Conference, 16th Proceedings. HOTWC 2006. May 16-18, 2006, Albuquerque, NM, 1-34 pp, 2006.
  McNesby, K. L.; Johnsson, E. L.
• Laboratory and Field Measurements of Hydrogen Fluoride Produced in Inhibited Flames Using Near-Infrared Tunable Diode Laser Spectroscopy.
  NISTIR 5904; October 1996.National Institute of Standards and Technology. Annual Conference on Fire Research: Book of Abstracts. October 28-31, 1996, Gaithersburg, MD, 123-124 pp, 1996.
  McNesby, K. L.; Daniel, R. G.; Miziolek, A. W.; Modiano, S. H.
• Laser Imaging of Chemistry-Flowfield Interactions: Enhanced Soot Formation in Time-Varying Diffusion Flames.
  Society of Photo-Optical Instrumentation Engineers (SPIE). Laser Techniques for State-Selected and State-to-State Chemistry II. Session 5. Laser Diagnostics for Combustion. Volume 2124. January 27-29, 1994, Los Angeles, CA, SPIE, Bellingham, WA, Editor(s), 1-14 pp, 1994.
  Harrington, J. E.; Shaddix, C. R.; Smyth, K. C.
• Laser-Induced Fluorescence Measurements of Formaldehyde in a Methane/Air Diffusion Flame.
  Chemical Physics Letters, Vol. 202, No. 3-4, 196-202, January 22, 1993.
  Harrington, J. E.; Smyth, K. C.
• Laser-Induced Incandescence Calibration via Gravimetric Sampling.
  Combustion Institute/Central and Western States (USA) and Combustion Institute/Mexican National Section and American Flame Research Committee. Combustion Fundamentals and Applications. Joint Technical Meeting. Proceedings. April 23-26, 1995, San Antonio, TX, Gore, J. P., Editor(s), 98-103 pp, 1995.
  VanderWal, R. L.; Zhou, Z.; Choi, M. Y.
• Laser-Induced Incandescence Measurements of Soot Production in Steady and Flickering Methane, Propane, and Ethylene Diffusion Flames.
  Combustion and Flame, Vol. 107, No. 4, 418-452, 1996.
  Shaddix, C. R.; Smyth, K. C.
• Laser Measurements of Soot and CO Production in Time-Varying, Hydrocarbon Diffusion Flames.
  University of California, Berkeley. Toxic Toxic Combustion Byproducts. 4th International Congress. ABSTRACTS ONLY. June 5-7, 1995, Berkeley, CA, 59 pp, 1995.
  Shaddix, C. R.; Everest, D. A.; Smyth, K. C.
• Laser Scanning for Construction Metrology.
  Paper 082;Robotics and Remote Systems, 9th International Topical Meeting. Proceedings. American Nuclear Society. Paper 082. March 4-8, 2001, Seattle, WA, 1-9 pp, 2001.
  Cheok, G. S.; Stone, W. C.; Lipman, R. R.; Witzgall, C.; Bernal, J.
• Measurement of Absolute Oxygen Concentration by Tunable Diode Laser Absorption Spectroscopy (TDLAS) in Very Fine Water Mist Environments.
  NIST SP 984-2; NIST Special Publication 984-2;Halon Options Technical Working Conference, 14th. Proceedings. HOTWC 2004. Sponsored by: 3M Specialty Materials, Boeing, Chemical Development Studies, Inc., DuPont Fire Extinguishants, Halon Alternative Research Corp., Hughes Associates, Inc., Kidde-Fenwal, Inc., Sandia National Laboratories, SEVO Systems, Next Generation Fire Suppression Technology Program. May 4-6, 2004, Albuquerque, NM, 1-15 pp, 2004.
  Awtry, A.; Teichert, H.; Ebert, V.; Fleming, J. W.
• Measurements of Formaldehyde Concentrations and Formation Rates in a Methane-Air, Non-Premixed Flame and Their Implications for Heat-Release Rate.
  Combustion Institute, Symposium (International) on Combustion, 27th. Proceedings. Volume 1. August 2-7, 1998, Boulder CO, Combustion Institute, Pittsburgh, PA, 633-640 pp, 1998.
  Tolocka, M. P.; Miller, J. H.
• Mixing and Radiation Properties of Buoyant Turbulent Diffusion Flames. September 1, 1993-August 31, 1994.
  NIST GCR 95-671; GDL/GMF-94-01; 98 p. June 1955.
  Dai, Z.; Tseng, L. K.; Koylu, U. O.; Faeth, G. M.
• NIST Construction Automation Program Report No. 4: Non-Intrusive Scanning Technology for Construction Status Determination.
  NISTIR 6457; 98 p. January 2000.
  Cheok, G. S.; Lipman, R. R.; Witzgall, C.; Bernal, J.; Stone, W. C.
• NIST LADAR Performance Evaluation Workshop, 2nd Proceedings. March 15-16, 2005.
  NISTIR 7266; October 2005.NIST LADAR Performance Evaluation Workshop, 2nd Proceedings. March 15-16, 2005, Gaithersburg, MD, 67 pp, 2005.
  Cheok, G. S.
• Non-Intrusive Scanning Technology for Construction Assessment.
  Automation and Robotics in Construction, 16th IAARC/IFAC/IEEE International Symposium. ISARC'99. Proceedings. September 22-24, 1999, Madrid, Spain, Universidad Carlos III de Madrid (UC3M), Spain, Balaguer, C., Editor(s), 645-650 pp, 1999.
  Cheok, G. S.; Stone, W. C.
• NO Production and Destruction in a Methane/Air Diffusion Flame.
  Combustion Science and Technology, Vol. 115, 151-176, 1996.
  Smyth, K. C.
• Obtaining and Interpreting Near-Infrared Wavelength Modulation Absorption Signals From Hot Fire Gases: Practical Issues.
  Chemical and Physical Processes of Combustion, Fall Technical Meeting. Proceedings. Combustion Institute/Eastern States Section. October 13-19, 1999, Raleigh, NC, 85-88 pp, 1999.
  Blevins, L. G.; Peterson, B. W.
• Oxygen Concentration Measurements Usion Diode Lasers.
  NISTIR 5766; November 1995.National Institute of Standards and Technology. Solid Propellant Gas Generators: Proceedings of the 1995 Workshop. June 28-29, 1995, Gaithersburg, MD, 173-182 pp, 1995.
  Bomse, D. S.
• Quantitative Measurements of Enhanced Soot Production in a Flickering Methane/Air Diffusion Flame.
  Combustion Institute. Symposium (International) on Combustion, 25th. Proceedings. Abstracts of Symposium Papers. Session 09-F: Soot Formation. July 31-August 5, 1994, Irvine, CA, Combustion Institute, Pittsburgh, PA, 93 pp, 1994.Combustion and Flame, Vol. 99, 723-732, 1994.
  Shaddix, C. R.; Harrington, J. E.; Smyth, K. C.
• Relating Gloss Loss to Topographical Features of a PVDF Coating.
  Annual Meeting, 82nd. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT) Meeting. Proceedings. October 27-29, 2004, Chicago, IL, Federation of Societies for Coatings Technology, Blue Bell, PA, 2004.
  Faucheu, J.; Sung, L. P.; Martin, J. W.; Wood, K. A.
• Relationship Between Chemical Degradation and Thickness Loss of an Amine-Cured Epoxy Coatings Exposed to Different UV Conditions.
  Journal of Coatings Technology Research, Vol. 1, No. 3, 2004.
  Rezig, A.; Nguyen, T.; Martin, D.; Sung, L. P.; Gu, X.; Jamin, J.; Martin, J. W.
• Simultaneous Measurements of Drop Size and Velocity in Large-Scale Sprinkler Flows Using Laser-Induced Fluorescence.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 2. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 471-481 pp, 2000.
  Everest, D.; Atreya, A.
• Simultaneous Measurements of Drop Size and Velocity in Large-Scale Sprinkler Flows Using Particle Tracking and Laser-Induced Fluorescence.
  NIST GCR 03-852; 56 p. July 2003.
  Putorti, A. D., Jr.; Everest, D. A.; Atreya, A.
• Simultaneous Measurements of Drop Size and Velocity in Large-Scale Sprinkler Flows Using Particle Tracking and Laser-Induced Fluorescence.
  NIST GCR 04-861; 322 p. February 2004.
  Putorti, A. D., Jr.
• Soot Formation in the Buoyancy-Dominated Ethane Diffusion Flame.
  NIST GCR 92-609; 46 p. July 1992.
  Subramaniasivam, H.
• Spectroscopic Studies of Inhibited Opposed-Flow Propane/Air Flames.
  Halon Options Technical Working Conference. Proceedings. HOTWC 1999. April 27-29, 1999, Albuquerque, NM, 117-131 pp, 1999.
  Skaggs, R. R.; Daniel, R. G.; Miziolek, A. W.; McNesby, K. L.; Babushok, V. I.; Tsang, W.; Smooke, M. D.
• Spot and Aspriated Laser Smoke Detection in Telecommunications Facilities.
  NIST SP 965; February 2001.International Conference on Automatic Fire Detection "AUBE '01", 12th. Proceedings. National Institute of Standards and Technology. March 25-28, 2001, Gaithersburg, MD, Beall, K.; Grosshandler, W. L.; Luck, H., Editor(s)(s), 151-162 pp, 2001.
  Gottuk, D. T.; McKenna, L. A., Jr.
• Spray Characteristics of Fire Sprinklers.
  NIST GCR 02-838; Thesis; 204 p. June 2002.
  Sheppard, D. T.
• Towards the Ultimate Construction Site Sensor.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 393-400 pp, 2002.
  Stone, W. C.; Juberts, M.
• Two-Dimensional Soot Distributions in Buoyant Turbulent Fires.
  Combustion Institute, Symposium (International) on Combustion, 30th. Proceedings. Volume 30. Part 1. July 25-30, 2004, Chicago, IL, Combustion Institute, Pittsburgh, PA, Chen, J. H.; Colket, M. D.; Barlow, R. S.; Yetter, R. A., Editor(s)(s), 719-726 pp, 2005.
  Xin, Y.; Gore, J. P.
• Two-Sided Ignition of a Thin PMMA Sheet in Microgravity.
  Combustion Institute, Symposium (International) on Combustion, 30th. Proceedings. Volume 30. Part 2. July 25-30, 2004, Chicago, IL, Combustion Institute, Pittsburgh, PA, Chen, J. H.; Colket, M. D.; Barlow, R. S.; Yetter, R. A., Editor(s)(s), 2319-2325 pp, 2005.
  Nakamura, Y.; Kashiwagi, T.; Olson, S. L.; Nishizawa, K.; Fujita, O.; Ito, K.
• Use of Laser-Induced Ionization to Detect Soot Inception in Premixed Flames.
  Applied Optics, Vol. 44, No. 24, 5105-5111, August 20, 2005.
  Manzello, S. L.; Lee, E. J.; Mulholland, G. W.
• Use of Laser Scanning Confocal Microscopy for Characterizing Changes in Film Thickness and Local Surface Morphology of UV Exposed Polymer Coatings.
  Journal of Coatings Technology Research, Vol. 1, No. 4, 267-276, 2004.
  Sung, L. P.; Jasmin, J.; Gu, X.; Nguyen, T.; Martin, J. W.
• Use of Laser Scanning Confocal Microscopy for Quantitative Characterization of Physical Changes of Polymer Coatings After UV Exposure.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  Sung, L. P.; Jasmin, J.; Gu, X.; Nguyen, T.; Martin, J. W.
• Using LADAR to Characterize the 3-D Shape of Aggregates: Preliminary Results.
  Cement and Concrete Research, Vol. 36, No. 6, 1072-1075, June 2006.
  Garboczi, E. J.; Cheok, G. S.; Stone, W. C.
• Water Mist Visualization and Droplet Size Analysis in Large-Scale Fire Suppression Research.
  Halon Options Technical Working Conference. Proceedings. HOTWC 2001. Sponsored by: University of New Mexico, Fire Suppression Systems Assoc., Fire and Safety Group, GlobeTech, Inc., Halon Alternative Research Corp., Hughes Associates, Inc., Kidde plc., Modular Protection, Corp., Next Generation Fire Suppression Technology Program, Sandia National Laboratories, Summit Environmental Corp., Inc. and 3M Specialty Materials. April 24-26, 2001, Albuquerque, NM, Daniels, B. L.; Cole, D. G., Editor(s)(s), 407-413 pp, 2001.
  Anleitner, R.; Burchell, H.; Fleming, J. W.; Maranghides, A.; Montgomery, J.; Sheinson, R. S.